Features
- High and low speed inputs in one unit.
- Relay hold time programmable from 0.1 second increments.
- Reset achieved via the front panel push-button, via external switch or via NPN sensors.
- DC (NPN or PNP) or Namur sensor compatible high speed input (order option).
- Large 4-digit display with leading zero suppression.
- Separate up and down count inputs in ADD/Subtract mode 1.
- Separate count and count direction input in ADD/Subtract mode 2.
- User friendly keypad programming.
- 48 x 48mm (1/16 DIN) panel mounting housing format.
Specifications
Input Specifications
High Speed Input:
Namur sensor DIN 19234
DC: NPN or PNP sensor
Maximum input frequency: 500Hz
Minimum pulse width: 1 millisecond
Active pulse edge: Positive or Negative
Slow Speed Input:
Namur & DC: Potential free contact or NPN sensor (open collector type)
Maximum input frequency: 30Hz
Minimum pulse width: 16.7ms
Active pulse edge: Positive of Negative
Reset Input:
Namur & DC: Potential free contact or NPN sensor
Maximum input frequency: 500Hz
Minimum pulse width: 1 millisecond
Active pulse edge: Negative: holds count value. Positive (if low for <2 sec): resets count value and clears error messages
Sensor Interface
Replace * with sensor type
*D= PNP/NPN
*N= Namur
Namur: 8.2V DC / 10mA
NPN or PNP sensor: 12V DC/30mA
Max. NPN sensor saturation voltage: 2VDC, 2.5V DC
Maximum PNP sensor saturation voltage: 2V DC (high speed count input)
Output Specification
Relay: 250VAC, 8A, SPDT
SSR drive: 10mA at 6V
General Specifications
Supply Voltage: Replace ** with 12VAC, 12VDC, 24VAC, 24VDC, 48VAC, 115VAC, 230VAC, 400VAC
